User's Manual

When the target of low temperature needs to be colored, you can set the low temperature
color. Target below the seng temperature will be displayed in seng color.
5. Click Save.
9.2.13 DDE
Digital Detail Enhancement is used to adjust the details of the image. OFF and Normal modes are
selectable.
OFF
Disable this
funcon.
Normal
Set the DDE level to control the details of the image. The higher the level is, the more details
shows, but the higher the noise is.
9.2.14 Brightness Sudden Change
When the brightness of target and the background is hugely dierent (the temperature dierence
of target and background is huge), the system reduces the dierence for viewing.
9.2.15 Enhance Regional Image
You can select the desired area of image to improve the coding quality. The regional image will be
more detailed and clear.
Steps
1. Go to
Conguraon → Image → Display Sengs → Image Enhancement .
2. Select the area of regional image enhancement. You can select OFF to disable this funcon, or
select Custom Area to draw a desired area.
A red rectangle shows on the display, in which the image quality is improved.
9.2.16 Mirror
When the live view image is the reverse of the actual scene, this funcon helps to display the
image normally.
Select the mirror mode as needed.
Note
The video recording will be shortly interrupted when the funcon is enabled.
Thermal & Opcal Bi-spectrum Network Camera User Manual
47