User's Manual

Firmware Directory Locate the directory which the upgrade le belongs to.
3. Click Browse to select the upgrade
le.
4. Click Upgrade.
12.8 View Open Source Soware License
Go to Conguraon → System → System Sengs → About Device , and click View Licenses.
12.9 Time and Date
You can
congure me and date of the device by conguring me zone, me synchronizaon and
Daylight Saving Time (DST).
12.9.1 Synchronize Time Manually
Steps
1. Go to
Conguraon → System → System Sengs → Time Sengs .
2. Select Time Zone.
3. Click Manual Time Sync..
4. Choose one
me synchronizaon method.
-
Select Set Time, and manually input or select date and
me from the pop-up calendar.
-
Check Sync. with computer me to synchronize the me of the device with that of the local
PC.
5. Click Save.
12.9.2 Set NTP Server
You can use NTP server when accurate and reliable me source is required.
Before You Start
Set up a NTP server or obtain NTP server informaon.
Steps
1. Go to
Conguraon → System → System Sengs → Time Sengs .
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port and Interval.
Note
Server Address is NTP server IP address.
5. Click Test to test server connecon.
Thermal & Opcal Bi-spectrum Network Camera User Manual
67