Quick Start Guide

Quick Start Guide of Thermal & Optical Bi-spectrum Network Bullet Camera
30
3.2 Activate the Camera
You are required to activate the camera first by setting a strong
password for it before you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via
Client Software are all supported. We will take activation via SADP
software and Activation via Web Browser as examples to introduce
the camera activation. Please refer to the User Manual of Network
Camera for Activation via Client Software.
3.2.1 Activate via Web Browser
Steps:
2. Power on the camera, and connect the camera to the network.
3. Input the IP address into the address bar of the web browser, and
click Enter to enter the activation interface.
 The default IP address of the camera is 192.168.1.64.
 For the camera enables the DHCP by default, you need to
activate the camera via SADP software and search the IP
address.