Quick Start Guide

Quick Start Guide of Thermal & Optical Bi-spectrum Network Bullet Camera
24
5. Align the hole of drill template with the screw hole of the junction
box base to place the junction box onto the wall.
6. Route the screw through the sealing ring, and fix the junction box
base on the wall with the screws.
Sealing Ring
Screw
Install Junction Box Base
7. Route the cables through the cable hole.
8. Insert the latches into the latch holes to fix the bracket and
camera with the junction box.
Wall Mounting Ceiling Mounting Stand Mounting
Install Junction Box Cover
9. Fix the delivered screws to secure the junction box.