Quick Start Guide

Thermal Network Speed dome·Quick Start Guide
12
Figure 3-6 Bracket and Accessories
2). Drill four Φ12 expansion screw holed on the wall and insert the delivered
screws into the holes.
Figure 3-7 Drill Screw Holes
3). Secure the wall mounting bracket with 4 hex nuts and washers.
Figure 3-8 Secure the Bracket
2. Stick thread tape to the thread of the head cover and rotate the head cover.
Secure the head cover to the bracket with delivered set screws.
①
②
③
Head Cover
Figure 3-9 Secure the Head Cover
3. Install the dome body to the head cover.
1). Buckle the handle to the safety rope.