Quick Start Guide

Thermal Network Speed dome·Quick Start Guide
v
 The installer and user are responsible for password and security configuration
and its settings.
 Both internal and external grounds should be connected properly. (The cross
section area of the grounding wire must be no less than 4 mm2, and no less
than that of the phase connector).
Cautions
 Do not drop the device or subject it to physical shock.
 Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
 Do not aim the lens at the sun or any other bright light.
 When any laser equipment is in use, make sure that the device lens is not
exposed to the laser beam, or it may burn out.
 Do not expose the device to high electromagnetic radiation or extremely hot,
cold, dusty, or damp environments.
 Place the device in a dry and well-ventilated environment.
 Keep non-waterproof devices away from liquids.
 Keep the device in original or similar packaging while transporting it.
 A few device components (e.g., electrolytic capacitor) require regular
replacement. The average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
 Improper use or replacement of the battery may result in explosion hazard.
Replace with the same or equivalent type only. Dispose of used batteries in
conformance with the instructions provided by the battery manufacturer.
 Never attempt to disassemble the device.
0505021080509