User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
97
7.2.3 Configuring ROI Settings
Purpose:
ROI (Region of Interest) encoding is used to enhance the quality of images which are
specified in advance. There are two different ROI methods: Fixed Region and Dynamic
Region. When Fixed Region is enabled, image quality of ROI area will be enhanced and
image quality of other areas will be reduced. When Dynamic Region is enabled, image
quality of tracking target will be enhanced.
ROI function varies depending on the models of speed dome.
Steps:
1. Enter the ROI settings interface:
Configuration >Video/Audio > ROI
2. Select the channel No. from the drop-down list.
Figure 7-24 Region of Interest (1)