User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
122
Figure 7-55 Picture in Picture
3. Drag the red frame to adjust the picture in picture site.
4. Click Save to activate above settings.
7.5 Configuring System Settings
7.5.1 System Settings
Viewing Basic Information
Enter the Device Information interface:
Configuration > System > System Settings > Basic Information
In the Basic Information interface, you can edit the Device Name and Device No..
Other information of the network zoom camera, such as Model, Serial No., Firmware
Version, Encoding Version, Web Version, Plugin Version, Number of Channels, Number of
HDDs, Number of Alarm Input and Number of Alarm Output are displayed. The information
cannot be changed in this menu. It is the reference for maintenance or modification in
future.