User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
123
Figure 7-56 Device Information
Time Settings
Purpose:
You can follow the instructions in this section to configure the time which can be
displayed on the video. There are Time Zone, Time Synchronization, Daylight Saving Time
(DST) functions for setting the time. Time Synchronization consists of auto mode by
Network Time Protocol (NTP) server and manual mode.
Enter the Time Settings interface:
Configuration > System > System Settings > Time Settings
Figure 7-57 Time Settings
Configuring Time Synchronization by NTP Server