User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
127
Figure 7-63 Restore Default Settings
Information Export
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Device Parameters and input the encryption password twice to encrypt the
config file.
Figure 7-64 Encryption Configuration File
3. Select the path to export the current configuration file. You can configure the other
cameras with the file.
4. Click Diagnose Information to view the device error information.
Importing/Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Browse to select the local configuration file and then click Import to start
importing configuration file.
You need to reboot the positioning system after importing configuration file.
Figure 7-65 Import Configuration File
3. If the configuration file is encrypted, enter the password.