User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
130
Figure 7-69 Hardware Settings
5. Click button to activate the settings.
VCA Resource Type
Purpose:
Before using the VCA function of the camera, you should select the VCA resource type
first. To use Temperature Measurement and Behavior Analysis, select Temperature
Measurement and Behavior Analysis. To use Temperature Measurement and Behavior
Analysis and Fire Detection function, select Temperature Measurement and Behavior
Analysis and Fire Detection.
Steps:
1. Enter the VCA Resource Type interface:
Configuration > Advanced Configuration > System > VCA Resource Type
Figure 7-70 VCA Information
2. Check the checkbox to enable the VCA resource type.
3. The system reboots and the selected VCA resource will be enabled.