User Manual

User Manual of Thermal Network Speed dome
© Hikvision
23
 Double-click on the live video to switch the current live view into full-screen or return to
normal mode from the full-screen.
 Click to select from / / / and display live video in 1 × 1/2 × 2/3 × 3/4
× 4 window.
 Click to select from / and display live video with the main/ sub stream.
The main stream is with a relatively high resolution and needs much bandwidth. The
default setting of stream type is .
 Click and it displays . Click to enable two-way audio and the icon turns
into . Click the icon again to stop two-way audio.
 Click to start live view and the icon turns into . Click the icon again to stop live
view.
 Click to capture the picture.
 Click to start recording and the icon turns into . Click the icon again to stop
recording.
 Click to switch between the optical channel and thermal channel when
selecting 1 × 1 live view window.
 Click to display the . Drag the slider to adjust the volumn.
 Click to show full screen of live view, press Esc to exit.
Before using the two-way audio or recording with audio functions, please set the Stream
Type to Video & Audio referring to Section 7.2.1 Configuring Video Settings.
Please refer to the following sections for more information:
 Configuring remote recording in Section 5.1.1 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 7.4 Configuring Image Settings.
and Section 7.2.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 7.4.2 Configuring OSD Settings.
4.4 Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to control panning, tilting
and zooming.
4.4.1 PTZ Control Panel
On the live view page, click to show the PTZ control panel or click to hide it.
Click the direction buttons to control the pan/tilt movements.