User Manual

User Manual of Thermal Network Speed dome
© Hikvision
26
Click to enable/disable the light supplement of the speed dome. This function is
reserved.
 Wiper
Click to move the wiper once.
 Auxiliary Focus
The auxiliary focus function is reserved.

Click and the lens operates the movements for initialization.

Click to enable manual De-Icing function of the device.
The de-icing function takes effect when the device inner temperature is ≤ 30°C (86°F).

Click to enable/disable the manual thermometry function of the device. You can
click any position on the interface to show the real temperature.

Click to synchronize the FOV of optical lens and thermal lens
 Manual Tracking
Before you start:
Go to Configuration > System > Maintenance > VCA Resource Type and select the VCA
Resource as Temperature Measurement + Behavior Analysis.
Then enter the VCA Information Configuration interface:
Configuration > VCA Configuration > VCA Info and enable Intelligent Analysis first.
Steps:
1. Click on the toolbar of live view interface.
2. Click a moving object in the live video.
The speed dome will track the object automatically.
 3D Positioning
Steps:
1. Click on the toolbar of live view interface.
2. Operate the 3D positioning function:
3. Click a position of the live video. The corresponding position will be moved to the
center of the live video.
4. Hold down the left mouse button and drag the mouse to the lower right on the live
video. The corresponding position will be moved to the center of the live video and