User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
42
4. Click to add the network disk.
After having saved successfully, you need to reboot the speed dome to activate the
settings.
Initialize the added network disk.
1. Enter the HDD settings interface (Configuration > Storage > Storage Management >
HDD Management), in which you can view the capacity, free space, status, type and
property of the disk.
Figure 5-6 Storage Management Interface
2. If the status of the disk is Uninitialized, check the corresponding checkbox to select the
disk and click Format to start initializing the disk.
3. When the initialization completed, the status of disk will become Normal as shown in
Figure 5-7.
Figure 5-7 View Disk Status
Define the Quota for Record and Pictures
1. Input the quota percentage for picture and for record.
2. Click Save and refresh the browser page to activate the settings.