User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
54
7. Click to save the settings.
5.3 Fire Source Detection Configuration
The functions vary depending on the models of speed dome.
If GPS information is required for
platform accessing?
Start
YES NO
Enable GPS of Position
Settings
Set the application scene
and zoom parameters.
Set the VCA resource to
Fire Detection
Enable Fire Detection
(Event > Dynamic Fire Source Detection)
If the PTZ function is supported by the
camera?
YES
END
NO
Enable Fire Detection Shield.
Enable the
patrol/park/linear scan.
Set the north as the
Initial Position
Enable the fire point in
the Local Settings.