User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
66
5.4.3 Linkage Method
Purpose:
Set the linkage method of the alarm.
Steps:
1. Enter Configuration > Temperature Measurement > Linkage Method.
2. Set the arming schedule and linkage method.
Arming Schedule: Click on the time bar and drag the mouse to select the time
period.
Linkage Method: Click Linkage Method and check the checkbox to select the
linkage method. Audible warning, notify surveillance center, send email, upload to
FTP, trigger channel and trigger alarm output are selectable. You can specify the
linkage method when an event occurs.
3. Click Save to save the settings.
After the settings, you can view the current temperature and humidity on the top of this
interface.
5.4.4 Search History Temperature
Purpose:
Search the history temperature and generate the temperature/time graphic.
Steps:
1. Select the camera channel, preset point, rule and display time interval from the
drop-down list.
2. Set the start time.
3. Click Search button to generate the graphic.
4. Click Export to download the graphic.
Figure 5-32 History Temperature Graphic Configuration