User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
74
Figure 6-9 Select Rule Type
3. (Optional) Configure the size filter, if you want to narrow the detection target to a
desired range.
a. Check the checkbox of the Filter by, and only filer by pixel is available.
b. Click the button and draw a rectangle on the live view image as the Min.
size filter.
c. Click the button and draw a rectangle on the live view image as the Max.
size filter.
4. Configure the rule area:
Click on the tool bar of the live view panel. Specify a point of the line by clicking
the mouse on the live view image, and then specify the other one.
Figure 6-10 Draw Line
5. Click the dropdown menu in the rule list to select the crossing direction.
6. Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
7. Click to save the settings.