User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Speed dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Speed dome Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 PTZ Configuration
- 7.4 Configuring Image Settings
- 7.5 Configuring System Settings
- Appendix
User Manual of Thermal Network Speed dome
© Hikvision
81
Steps:
(1) Enter the Server Address of the IP Server.
(2) Click to save the settings.
The Server Address should be entered with the static IP address of the computer that
runs the IP Server software. For the IP Server, you have to apply a static IP, subnet
mask, gateway and preferred DNS from the ISP.
Figure 7-5 IPServer Settings
HiDDNS:
Steps:
(1) Enter the Server Address.
(2) Enter the Domain name of the camera. The domain is the same with the device
alias in the HiDDNS server.
(3) Click to save the settings.
Figure 7-6 HiDDNS Settings
NO-IP:
Steps:
(1) Enter Server Address of NO-IP.
(2) In the Domain text field, enter the domain name obtained from the NO-IP website.
(3) Enter the Port of NO-IP server.
(4) Enter the User Name and Password registered on the NO-IP website.
(5) Click to save the settings.