How to Guide

Note:
1. Filtering Time: This parameter is used to provide triggering from some object with a high-
temperature but only appears for a short time. The chosen range is 0~200s.
2. Alarm output: The pre-alarm and alarm could choose independent alarm out from the version
5.5.0Build180411(bullet cameras)/5.5.2Build180528(PTZ cameras)
● Expert Mode:(bullet cameras differ from device with PTZ)
Bullet camera:
Customize the rule name and fill in the distance, then select point, line or area as rule type and
draw the figure.
Note:
1. Each scene supports 10 points, 10 frames and 1 line.
2. The Reflective Temperature is not often used, it only take effect when the heat of another
object interfere the temperature of the target. Enter the temperature of the interference
object, the result of the target will be more accurate.
Camera with PTZ:
Because thermal cameras with PTZ support multiple-scenes temperature measurement. So we
must create a preset before measuring.
Adjust the image to the scene for temperature measurement with the PTZ control panel. Save
current scene as certain preset