Quick Start Guide

Thermometric Network Positioning System
·Quick Start Guide
8
6. Secure ① with the ③ in clockwise direction.
Waterproof Other Cables
After routing and connecting the cables, use the waterproof tapes to wrap up the cables.
Connected cables and spare cables both should be wrapped up as the figures below.
Figure 2-9 Waterproof Cable
2.3.3 Installing Positioning System
Steps:
1. Open the package and take out the housing, positioning system base and other
accessories such as screws.
Note: Make sure that there is space of R530mm for running the positioning system.
2. Take out the four screws (Model: M6x24), and put the pad on the screw and place the
housing on the positioning system to connect them as the figure below.
Aviation Plug
Screws
Figure 2-10 Connect the Housing and the Positioning System Base