Quick Start Guide
Table Of Contents
Thermometric Network Positioning System
ยทQuick Start Guide
11
Installing Holes
Sealing Interface
Wall
Figure 2-14 Fix the Junction Box
4). Fix the junction box with expansion screws.
5). Loosen four screws of the junction box cover with the wrench (supplied), and
open the junction box cover, as shown in the figure below.
Figure 2-15 Open the Junction Box
6). Move the cover according to the direction of the arrow to take apart the cover.
Figure 2-16 Take Apart the Junction Box Cover
7). Connect the cables according to the following instructions.