Quick Start Guide

Thermometric Network Positioning System
·Quick Start Guide
14
2.3.4 Sealing the Junction Box
Steps:
1. Take apart the cover of the junction box, and rotate the screw nut to take out the
sealing ring inside.
2. Lead the cables through the sealing ring, and the screw nut, as shown in Figure 2-18.
3. Use a proper wrench (not supplied) to tighten the screw nuts.
Sealing Ring
Screw Nut
Cables
Figure 2-18 Seal the Cables
4. Tighten the screws to fix the cover.
Figure 2-19 Fixing the Cover
Notes:
 Keep all sealing rings saved for potential use.
 We provide multiple sealing rings of different specifications for different cables.
 We recommend you to lead one cable through one hole, for leading multiple
cables, use the water-proof glue to seal the cables.