Quick Start Guide

Thermometric Network Positioning System
·Quick Start Guide
vi
Maintenance
● If the product does not work properly, please contact your dealer or the nearest
service center. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
● A few device components (e.g., electrolytic capacitor) require regular replacement.
The average lifespan varies, so periodic checking is recommended. Contact your
dealer for details.
● Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
● If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the device may be impaired.
● To reduce the risk of fire, replace only with the same type and rating of fuse.
● The serial port of the equipment is used for debugging only.
● Disconnect the power source during servicing.
Using Environment
● Make sure the running environment meets the requirement of the device. The
operating temperature shall be – 40 °C to 60 °C (- 40 °F to 140 °F), and the
operating humidity shall be 95% or less, no condensing.
● DO NOT expose the device to high electromagnetic radiation or dusty
environments.
● DO NOT aim the lens at the sun or any other bright light.
● The equipment shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the equipment.
● No naked flame sources, such as lighted candles, should be placed on the
equipment.
● Provide a surge suppressor at the inlet opening of the equipment under special
conditions such as the mountain top, iron tower, and forest.
● Burned fingers when handling the parts with symbol
. Wait one-half hour after
switching off before handling the parts.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls
in various countries or regions, including without limitation, the United States, European
Union, United Kingdom and/or other member countries of the Wassenaar Arrangement.
Please consult your professional legal or compliance expert or local government
authorities for any necessary export license requirements if you intend to transfer,
export, re-export the thermal series products between different countries.