User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
101
3. Configure the SNMP settings.
The configuration of the SNMP software should be the same as the settings you configure
here.
4. Click .
Configure FTP
Purpose:
You can set a FTP server and configure the following parameters for uploading captured pictures.
Steps:
1. Go to the. FTP settings interface:
Configuration > Network > Advanced Settings > FTP
Figure 7-10 FTP Settings
2. Configure the FTP settings, including server address, port, user name, password, directory,
and upload type.
The server address supports both the domain name and IP address formats.
We highly recommend you create a strong password of your own choosing (using a minimum
of 8 characters, including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you reset
your password regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
Set the directory in FTP server for saving files:
In the Directory Structure field, you can select the root directory, parent directory and
child directory.