User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
102
 Root directory: The files will be saved in the root of FTP server.
 Parent directory: The files will be saved in a folder in FTP server. The name of folder can
be defined as shown in following Figure 7-11.
Figure 7-11 Parent Directory
 Child directory: It is a sub-folder which can be created in the parent directory. The files
will be saved in a sub-folder in FTP server. The name of folder can be defined as shown
in following Figure 7-12.
Figure 7-12 Child Directory
 Upload type: To enable uploading the captured picture to the FTP server.
3. Click .
4. You can click Test to confirm the configuration.
If you want to upload the captured pictures to FTP server, you also have to enable the
continuous snapshot or event-triggered snapshot in Snapshot interface.
Configure Email Settings
Purpose:
The system can be configured to send an Email notification to all designated receivers if an alarm
event is detected, e.g., motion detection event, video loss, video-tampering, etc.
Before you start:
Please configure the DNS Server settings under Configuration> Network > Basic Settings >
TCP/IP before using the Email function.
Steps:
1. Go to the. Email settings interface:
Configuration> Network > Advanced Settings > Email