User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
112
Configuration >Video/Audio > ROI
2. Select the channel No. from the drop-down list.
Figure 7-23 Region of Interest
ROI for Fixed Region
Steps:
1. Check Enable .
2. Select a stream type. You can set the ROI function for main stream, sub stream or third
stream.
3. Click and then click-and-drag the mouse to draw a red frame in the live view
image. You can click to clear it.
The number of areas supported in ROI function varies depending on the models of device.
4. Select the Region No. from the dropdown list.
5. Adjust the ROI level from 1 to 6. The higher the value, the better image quality in the red
frame.
6. Enter a Region Name.
7.3 Configure Image Settings