User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
121
Local Output: Turn on or off the local output of device.
7.3.2 Configure OSD Settings
Purpose:
The device supports following on screen displays:
Time: Supports for time display.
Camera Name: Identifies the name of device.
You can customize the on screen display of time.
Steps:
1. Go to the. OSD settings interface:
Configuration > Image > OSD Settings
2. Select the channel No..
Figure 7-36 OSD Settings
3. Select the display of device name, date or week if required.
4. Edit the device name in the text field of Camera Name.
5. Set the time format, date format, display mode, OSD size and Font color.
6. Click and drag the text frame in the live view window to adjust the OSD position.