User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
130
View License
Purpose:
You can view the open source software licenses that are applied to the IP camera.
Steps:
1. Go to Configuration > System > System Settings > About .
2. Click View Licenses.
Figure 7-49 About Device Interface
Set Same Unit
Purpose:
Set the same temperature unit and distance unit in this page. When you enable this function, the
unit cannot be configured separately in other setting pages.
Steps:
1. Go to Configuration > System > System Settings > Unit Settings.
2. Check Use Same Unit.
3. Set the temperature unit and distance unit.
4. Click Save.
Figure 7-50 Unit Settings
7.4.2 Maintenance
Upgrade & Maintenance
Reboot the Device