User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
131
Steps:
1. Go to the. Maintenance interface:
2. Configuration > System > Maintenance > Upgrade & Maintenance:
3. Click Reboot to reboot the network device.
 Restore Default Settings
Steps:
1. Go to the. Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Restore or Default to restore the default settings.
Click Default to restores all the parameters to default settings including the IP address and
user information. Please use this button with caution.
Figure 7-51 Restore Default Settings
 Information Export
Steps:
1. Go to the. Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Device Parameters and input the encryption password twice to encrypt the config file.
Figure 7-52 Encryption Configuration File
3. Select the path to export the current configuration file. You can configure the other cameras
with the file.
4. Click Diagnose Information to view the device error information.
 Import/Export Configuration File
Steps:
1. Go to the. Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Browse to select the local configuration file and then click Import to start importing
configuration file.