User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
133
also export the log files on your demand.
Before you start:
Please configure network storage for the device or insert a memory card in the device.
Steps:
1. Go to the Log interface:
Configuration >System > Maintenance > Log
Figure 7-56 Log Searching Interface
2. Set the log search conditions to specify the search, including the Major Type, Minor Type,
Start Time and End Time as shown in Figure 7-56.
3. Click . The matched log files will be displayed on the Log interface.
4. To export the log files, click Save Log.
VCA Resource Type
Purpose:
Before using the VCA function of the camera, you should select the VCA resource type first. To
use Temperature Measurement and Behavior Analysis, select Temperature Measurement and
Behavior Analysis. To use Temperature Measurement and Behavior Analysis and Fire Detection
function, select Temperature Measurement and Behavior Analysis and Fire Detection.
Steps:
1. Go to the. VCA Resource Type interface:
Configuration > Advanced Configuration > System > VCA Resource Type