User Manual

ManualsBrandsHikvision ManualsPT seriesThermal & Optical Bi-spectrum Network Stable PTZ Camera

Table Of Contents

Chapter 1 Overview
Chapter 2 Network Connection
- 2.1 Set the Network Device over the LAN
  - 2.1.1 Wiring over the LAN
  - 2.1.2 Activate the Device
- 2.2 Set the Network Device over the WAN
  - 2.2.1 Static IP Connection
  - 2.2.2 Dynamic IP Connection
Chapter 3 Access to the Network Device
Chapter 4 Basic Operations
Chapter 5 System Configuration
Chapter 6 VCA Configuration
Chapter 7 Device Configuration
Appendix
- Appendix 1
- Appendix 2

User Manual of Thermal Bi-spectrum Network PTZ Device 
8 
 
 
Figure 1-9 Edit the Schedule and Task Type 
 
The time of each task cannot be overlapped. Up to 10 tasks can be configured for each 
day. 
7.  Click  . 
1.3.6  Clear PTZ Configurations 
Purpose: 
You can clear PTZ configurations in this interface, including all presets, patrols, privacy masks, PTZ 
limits, scheduled tasks and park actions. 
   
Pattern function varies depending on device models. 
Steps: 
1.  Go to the. Clearing Configuration interface: 
Configuration > PTZ > Clear Config 
2.  Select the items you want to clear. 
3.  Click  . 
1.3.7  Prioritize PTZ 
Steps: 
1.  Go to the Prioritize PTZ interface: 
Configuration > PTZ > Prioritize PTZ. 
 