User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
135
Figure 7-58 IP Address Filter
2. Check Enable IP Address Filter.
3. Select the type of IP Address Filter in the dropdown list, Forbidden and Allowed are
selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps:
(1) Click Add.
(2) Input the IP Adreess.
Figure 7-59 Add an IP
(3) Click OK.
 Modify an IP Address
Steps:
(1) Left-click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.