User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
136
Figure 7-60 Modify an IP
(3) Click OK.
 Delete an IP Address
Left-click an IP address from filter list and click Delete.
 Delete all IP Addresses
Click Clear to delete all the IP addresses.
5. Click .
Configure Security Service Settings
Steps:
1. Go to the. Security Service interface:
Configuration> System > Security > Security Service
2. Check to enable the SSH function.
Enable SSH: Enabling SSH (Secure Shell) function is to encrypt and compress the data and to
reduce the transmission time.
3. Check to enable the Illegal Login Lock function.
Illegal Login Lock: Enabling illegal login lock function is to automatically lock the device IP
after the admin user performing 7 failed password attempts (5 attempts for the
user/operator).
4. Click .
7.4.4 User Management
Go to the. User Management interface:
Configuration > System > User Management
The admin user has access to create, modify or delete other accounts. Up to 32 user accounts can
be created.