User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
15
Network
Speed Dome
Switch
Internet
NVR
PC
Figure 2-2 Connect via a Switch or a Router
2.1.2 Activate the Device
Purpose:
You are required to activate the device first before you can use the device.
Activation via Web Browser, Activation via SADP, and Activation via client software are supported.
In the following sections, activation via web browser and SADP will be taken as examples. You
may refer to the user manual of the device for the details of activation via client software.
Activate via Web Browser
Steps:
1. Power on the device, and connect the device to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to go to the.
activation interface.
The default IP address of the device is 192.168.1.64.
Figure 2-3 Activation Interface(Web)
3. Create a password and input the password into the password field.
4. Confirm the password.