User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
18
Speed Dome
Network
Cable
Router with Static IP
PC
Network
Cable
Network
Cable
Internet
Figure 2-6 Access the Device through Router with Static IP
 Connect the network device with static IP directly
You can also save the static IP in the device and directly connect it to the internet without using a
router. Refer to Section 2.1.2 for detailed IP address configuration of the device.
Speed Dome
PC
Network
Cable
Network
Cable
Internet
Figure 2-7 Access the Device with Static IP Directly
2.2.2 Dynamic IP Connection
Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the network
device to a modem or a router.
 Connect the network device via a router
Steps:
1. Connect the network device to the router.
2. In the device, assign a LAN IP address, the subnet mask and the gateway. Refer to Section
2.1.2 for detailed LAN configuration.
3. In the router, set the PPPoE user name, password and confirm the password.
We highly recommend you create a strong password of your own choosing (using a minimum
of 8 characters, including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you reset
your password regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.