User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
31
4.4.3 Set / Call a Preset
Purpose:
A preset is a predefined image position. For the defined preset, you can click the calling button to
quickly view the desired image position.
 Set a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
Figure 4-6 Set a Preset
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. Edit a preset name by double clicking on the default name such as preset 1. (The pre-defined presets are
named already and not configurable. Please refer to the user manual for detailed function description.)
5. You can click to delete the preset.
You can configure up to 256 presets.
 Call a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the preset.
Figure 4-7 Call a Preset
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.