User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
33
4.4.4 Set / Call a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on the patrol
settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32
presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Set a Patrol:
Steps:
1. In the PTZ control panel, click to go to the. patrol settings interface.
2. Select a patrol number from the list and click .
3. Click to go to the. adding interface of preset, as shown in Figure 4-9.
Figure 4-9 Add Presets
4. Configure the preset number, patrol time and patrol speed.
Name
Description
Patrol Time
It is the duration staying on one patrol point. The device moves to
another patrol point after the patrol time.
Patrol Speed
It is the speed of moving from one preset to another.
5. Click OK to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click OK to save all the patrol settings.
 Call a Patrol:
In the PTZ control panel, select a defined patrol from the list and click to call the patrol, as
shown in Figure 4-10.