User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
35
5. Click to save all the pattern settings.
 Buttons on the Patterns interface:
Buttons
Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
 These 4 patterns can be operated separately and with no priority level.
 When configuring and calling the pattern, proportional pan is valid; the limit stops and auto
flip will be invalid; and the 3D positioning operation is not supported.
4.5 Quick Setup
It allows quick setup of image/video related parameters on live view page.
Steps:
1. Click button on the right of the live view page to show the PTZ control panel. Click to
hide it.
2. Specify Display, OSD, Video/Audio, and VCA resource parameters. For more settings, go to
Configuration -> Image, Configuration -> Video/Audio and Configuration -> VCA.
 Display Settings
Set the brightness, contrast, palettes, DNR, DDE, etc.
 OSD (On Screen Display)
Set text information displayed on screen. Save the settings after configuration.
 Video/Audio
Resolution and Max. Bit rate are adjustable. Click to change stream.
 VCA Resource
Select VCA resource type as required.
Note:
 VCA Resource function varies according to different camera models.
 VCA options are mutually exclusive.
 The function may not be supported by some camera models.