User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
43
recorded when the external alarm is triggered or the motion is detected. Besides
configure the recording schedule, you have to configure the settings on the Motion
Detection and Alarm Input settings interfaces.
 Record Triggered by VCA events: If you select VCA, the video will be recorded when the
either of the VCA events is triggered. Besides configure the recording schedule, you have
to configure the settings on the VCA interface.
VCA function varies depending on the models of device.
 Record Triggered by Event: If you select to record by event, the video will be recorded
when any of the events is triggered.
6. Click .
5.1.2 Configure Capture Schedule
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured picture
can be stored in the local storage or network storage.
Steps:
1. Go to the. Snapshot settings interface:
Configuration > Storage > Schedule Settings > Capture
Figure 5-3 Snapshot Settings
2. Click .
3. Select the timeline of a certain day, click and drag the left button of the mouse to set
the capture schedule (the start time and end time of the recording task).
4. After you set the scheduled task, you can click and copy the task to other days
(optional).
5. After setting the capture schedule, you can click a capture segment to display the