User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
56
Figure 5-19 Exception Settings
3. Click .
5.2.6 Configure Burning-Prevention
Purpose:
This function enable the movement of lens to protect it from high temperature damage.
Steps:
1. Go to Burning-Prevention interface.
2. Check Enable.
3. Set the protection mode as Lens Movement.
4. Set the protection duration.
5. Click Save.