User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
65
5.4 Temperature Measurement
Purpose:
When you enable this function, it measures the actual temperature of the spot being monitored.
The device alarms when temperature exceeds the temperature threshold value.
Before You Start:
Enter Configuration > Advanced Configuration > System > VCA Resource Type to select
Temperature Measurement + Behavior Analysis as VCA Resource Type.
5.4.1 Configure Temperature Measurement
Steps:
1. Go to Configuration > Temperature Measurement > Basic Settings.
Figure 5-26 Dynamic Fire Source Detection
2. Set the temperature measurement configurations.
Enable Temperature Measurement: Check to enable temperature measurement function.
Enable Color-Temperature: Check to display Temperature-Color Ruler in live view.
Display Temperature Info. on Stream: Check to display temperature information on the
stream.