User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
76
Steps:
7. Go to the. Park Action settings interface:
Configuration > PTZ > Park Action
Figure 5-36 Set the Park Action
8. Check Enable Park Action.
9. Set the Park Time as the inactivity time of the device before it starts the park actions.
10. Choose Action Type the from the dropdown list.
Figure 5-37 Action Types
11. Select the Action Type ID from the dropdown list.
12. Click .
5.5.8 Configure Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the
surveillance area from being live viewed and recorded.
Steps:
8. Go to the. Privacy Mask settings interface:
Configuration > PTZ > Privacy Mask