User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Device
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- Chapter 6 VCA Configuration
- Chapter 7 Device Configuration
- 7.1 Configure Network Settings
- 7.2 Configure Video and Audio Settings
- 7.3 Configure Image Settings
- 7.4 Configure System Settings
- Appendix
User Manual of Thermal Bi-spectrum Network PTZ Device
78
5.5.9 Configure Scheduled Tasks
Purpose:
You can configure the network device to perform a certain action automatically in a user-defined
time period.
Steps:
8. Go to the. Scheduled Task settings interface:
Configuration> PTZ > Scheduled Tasks
Figure 5-40 Configure Scheduled Tasks
9. Check Enable Scheduled Task.
10. Set the Park Time. You can set the park time (a period of inactivity) before the device starts
the scheduled tasks.
11. Select the task type from the dropdown list. You can choose scan, preset, pattern and etc.
Figure 5-41 Task Types
12. Select the timeline of a certain day, click and drag the the mouse to set the recording
schedule (the start time and end time of the recording task).
13. After you set the scheduled task, you can click and copy the task to other days
(optional).