User Manual

User Manual of Thermal Bi-spectrum Network PTZ Device
82
Chapter 6 VCA Configuration
Before you start:
Go to Configuration > System > Maintenance > VCA Resource Type and select the VCA Resource
as Temperature Measurement + Behavior Analysis.
Purpose:
You can do intelligent analysis, such as behavior analysis, with the device. Multiple rules can be
configured for different requirements.
The VCA (Video Content Analysis) function only supported by the thermal channel.
6.1 Configure VCA Information
Steps:
1. Go to the. VCA Information Configuration interface:
Configuration > VCA Configuration > VCA Info.
Figure 6-1 VCA Information
2. Check to enable the Intelligent Analysis. And you can view the current version for the
behavior analysis.
3. Set the display information:
 If you select to display the target info and rule info on the alarm picture are supported;
you can enable the functions by ticking the corresponding checkbox on your demand.
 And if you tick display target info and rule on stream, the information will be added to
the video stream, and the overlay will be displayed if you get live view or play back by
the VS Player.