Quick Start Guide

Network Dome Camera·Quick Start Guide
15
15
FRONT
Drill Template
Hole A: Rout cables through the ceiling
Hole B: Side outlet
Hole 1: Fix the mounting base
Please use Φ 5.5mm drill to
install expansion screws
Code: 102010928
Drill Template
2. Drill three screw holes according to Hole 1 on the drill template
and plan cable routing.
Note:
If you choose to route cable through ceiling, drill a cable hole
according to Hole A.
3. Range the drill template, the supplied shock-absorbing pad, and
the camera base in the shown order. Secure them with three
expansion screws.
Note:
Connect the cables before installing the camera base, if you
choose to route cables through ceiling.