HD Video and Audio Decoder User Manual UD02829B
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual User Manual COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Regulatory information FCC information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Applicable Model Series Model DS-6901UDI DS-6904UDI DS-6908UDI DS-6900UDI Decoder DS-6910UDI DS-6912UDI DS-6916UDI Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Safety Instructions Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Table of Contents Chapter 1 Introduction ..................................................................................................................... 1 1.1 Description ......................................................................................................................... 1 1.2 Features ..............................................................................................................................
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 4.4.5 Switching Encoding Channel ................................................................................... 44 4.4.6 Configuring Auto-Switch of Cameras ...................................................................... 44 4.4.7 Window Roaming .................................................................................................... 45 4.4.8 Setting Scene .............................................................
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Chapter 1 Introduction 1.1 Description Designed for the high-definition video monitoring system, DS-6900UDI Decoder is developed on the basis of embedded hardware platform, ensuring high reliability and stability of system running.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Remotely controls DVR’s or DVS’s PTZ via transparent channel. Two-way audio. Supports multi-screen control with PC installed with RSC server. Supports Wi-Fi module access to display the signal from IOS/Android mobile phone or pad on video wall. Wi-Fi can be enabled via the Web browser or client software. You can get stream and decode the video on the video wall when Wi-Fi is enabled if no wired network can be accessed.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Chapter 2 Panels and Connections 2.1 Front Panel Front panel of DS-6901UDI 1 2 3 4 5 6 7 Figure 2-1 Front Panel of DS-6901UDI Table 2-1 Description of DS-6901UDI Front Panel No.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Table 2-2 Description of DS-6904/6908UDI Front Panel LED Indicator & Interface Connections 1 Power Power indicator 2 HDD1 Hard disk 1 indicator (Reserved) 3 HDD2 Hard disk 2 indicator (Reserved) 4 USB USB 2.0 interface 5 GE2 Local management network interface 2 6 G2 10/100/1000 Mbps Ethernet interface 2 7 RS-232 serial interface Connect to RS-232 devices, e.g., PC etc.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Table 2-3 Description of DS-6916UDI Front Panel Table LED 2-4 Indicator & Interface Connections 1 HDD1 Hard disk 1 indicator (Reserved) 2 HDD2 Hard disk 2 indicator (Reserved) 3 POWER Power indicator 4 LAN 10/100 Mbps Ethernet interface 5 G1 10/100/1000 Mbps Ethernet interface 6 GE1 Local management network interface 7 RS-232 serial interface Connect to RS-232 devices, e.g., PC etc. 8 USB USB 2.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 4 5 6 RS-485 serial interface Connect to RS-485 devices, e.g., keyboard.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 2-6 Rear Panel of DS-6916UDI Table 2-7 Description of DS-6916UDI Rear Panel Interface Connections 1 Wi-Fi For Wi-Fi connection 2 Audio output BNC connector 3 Video output BNC connector 4 HDMI video output HDMI output of decoded video 5 DVI video input DVI input of decoded video 6 VGA video input VGA input of decoded video 7 LINE IN/OUT Two-way audio input/output, 3.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Chapter 3 Getting Started Purpose You are required to activate the decoder first by setting a strong password for it before you can use the device. And you can configure the basic network parameters. Activation via Web Browser and Client Software are all supported. For the first-time user, the default user name of DS-6900UDI is admin, and the default IP address is 192.0.0.64. 3.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 3-3 Activation Interface Step 3 Create a password and input the password into the password field. STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 3-4 Control Panel Step 2 Click the Device Management icon to enter the Device Management interface, as shown in the figure below. Figure 3-5 Control Panel Step 3 Check the device status from the device list, and select an inactive device. Step 4 Click the Activate button to pop up the Activation interface. Step 5 Create a password and input the password in the password field, and confirm the password.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Chapter 4 Decoder Configuration and Operation by Web Browser You shall acknowledge that the use of the product with the Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection. If the product does not work properly, contact with your dealer or the nearest service center.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-2 Activation Interface STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 4.1 Decoder Configuration 4.1.1 Checking Device Information Purpose You can check the information of the device in the device information interface, such as the Device Type, Device Serial No., Firmware Version, Decoding Version, Web Version, Plugin Version etc. Click Configuration > System > System Settings > Basic Information to view Device Type, Device Serial No., Firmware Version, DSP Version, etc.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-5 Configure Time Settings Step 2 Configure the time synchronization by NTP server or manually. Configuring Time Synchronization by NTP Server A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of system date/time.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Enable the Manual Time Sync. function by selecting the radio button and then click icon to set the system time from the pop-up calendar. Figure 4-7 Configure Time Manually Step 3 Select the time zone that is closest to the device’s location from the drop-down list. Step 4 Click Save to save the settings. 4.1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 4 Click Save to save the settings. Configure RS-485 Parameters Step 1 Click Configuration > System Settings > RS-485 to enter the following interface: Figure 4-9 Configure RS-485 Settings Step 2 Configure the RS-485 parameters, including the baud rate, data bit, stop bit and parity type. Step 3 Click Save to save the settings. 4.1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 2 Set the network parameters, including the NIC, IP Address, Subnet Mask, Gateway, and DNS Server. The DS-6904/6908/6910/6912/6916UDI provides multiple NICs for selection. Step 3 Click Save to save the settings. 4.1.5 Configuring DDNS Settings Purpose If your device is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be used for network access.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual For the IP Server, you have to apply a static IP, subnet mask, gateway and primary DNS from the ISP. The Server Address should be entered with the static IP address of the PC that runs IP Server software. Figure 4-12 IPServer Settings PeanutHull 1. Enter User Name and Password obtained from the PeanutHull website. 2. Click Save to save the settings. Figure 4-13 PeanutHull Settings HiDDNS 1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual If a new alias of the device domain name is defined in the decoder, it will replace the old one registered on the server. 3. Click Save to save the settings. Figure 4-14 HiDDNS Settings After having successfully registered the device on the HiDDNS server, you can access your device via Web browser or client software with the Device Domain Name (device name). 4.1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-15 Wi-Fi Settings Step 2 You can view the Wireless List on the interface. Click Search button to search the available wireless network. The SSID, Security Mode, Signal Strength and Connection Status are shown in the list. Up to 20 Wi-Fi can be listed. Step 3 Select one from the wireless list. Step 4 Check the checkbox of Enable Wi-Fi to enable the selected Wi-Fi. Step 5 You can view the Security Mode and other parameters.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual WEP 1. For the Authentication type, open and shared are selectable. With the open system authentication, key authentication is not needed for connecting the Wi-Fi. With the shared system authentication, the key must be matched with the preset access point key. 2. For the Key Length, 64 bit, 128 bit and 152 bit are selectable. 3. For the Key Type, HEX and ASCII are selectable. 4. Select one Key for activation. 4 keys can be selected.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 8 to 63 ASCII characters or 8 to 64 hexadecimal characters are allowed. WPA2-Personal Refer to the configuration of WPA-Personal for reference. Step 6 Click Save button to save the settings and the following note window pops up. Click OK to reboot the device and enter the Wi-Fi mode. Figure 4-19 Note (1) Step 7 (Optional) Uncheck the checkbox of Enable Wi-Fi and click Save to save the settings. The following note window pops up.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-21 Stream Configuration Interface Step 2 Check the check box of Auto-Switch Stream Type to enable auto switch between main stream and sub-stream. Step 3 Click Save button to save the settings. When a screen is split into more than 16 windows, the main stream will automatically switch to sub-stream to lower the bandwidth. 4.1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-23 Modifying Interface Step 4 Select the Local Serial Port and the Remote Serial Port to RS-485 or RS-232. Local Serial Port: The serial port used as the transparent channel by the decoder. Remote Serial Port: The serial port used as the transparent channel by the encoding device. You can click Delete to delete the selected channel. 4.1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-25 Enable Synchronous Output Step 3 Click OK to confirm the settings. 4.1.10 Configuring Personalized Settings Purpose You can set the stopped decoding image and failed streaming image for the personalized configuration. Step 1 Click Configuration > Decoding Configuration > Personalized Configuration to enter the personalized configuration interface.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-27 Configure User Account Step 2 You can add, modify or delete the user account, as well as configure operating permissions for each user account.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Up to 32 user accounts can be added including the admin. For the admin user, only the password can be modified. You must input the admin password if you want to modify the user account except the admin.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-30 Upgrade the Device When logging in to the device for the first time, install the plug-in according to the prompt on the screen. The device will restart after completing the upgrade. Restoring the Default Settings Click Default to restore the completed factory settings of the decoder. Or Click Restore to restore a part of the factory settings of the decoder.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 4.2 Setting Video Wall Layout Purpose To realize the display of the decoded video on the video wall, you must set the Video Wall Configuration first so as to link the video output with video wall. Step 1 Click Video Wall Configuration to enter the corresponding interface. Figure 4-33 Video Wall Configuration Step 2 You can use the default video wall layout or click to add a new layout.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-35 Close the Window 4.3 Configuring Decoding Output Purpose In the output list, there are two kinds of video output signals, respectively BNC and HDMI. You can configure the resolution and output mode. Configuring BNC Output Step 1 Click Video Wall Configuration to enter the corresponding interface. Right click one of the BNC signal sources.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-38 Batch Configuration Step 5 Click OK to save the settings. Configuring HDMI Output Step 1 Right click one of the HDMI signal sources. Figure 4-39 HDMI Decoding Output Step 2 Click Resolution Configuration to enter the interface below. Figure 4-40 Resolution Configuration Step 3 Select the Output Mode and set the corresponding parameters. You can select LCD and LED. LCD 1. Select the Output Mode to LCD. 1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-41 Set LCD Resolution LED 1. Select the Output Mode to LED. 1. Input the LED Width and LED Height in the corresponding text fields. Figure 4-42 Set LED Resolution The value of LED width and height cannot exceed the output resolution you select. The supported min. value of LED width × height of HDMI output is 288 × 288 and the max. value is 1920 × 1080.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-43 Batch Configuration Step 5 Click OK to save the settings. Step 6 Right click one of the HDMI signal sources and click Output Mode Configuration to pop up the interface below. Figure 4-44 Output Mode Configuration Step 7 Select the output mode to HDMI or DVI. Step 8 Check the checkbox of Batch Configuration to set the same configuration for other HDMI outputs. Step 9 Click OK to save the settings. 4.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-45 Video Wall Interface Refer to the following figure for the video wall description. Table 4-1 Description of Video Wall No. Description 1 Encoding Device List: The encoding devices added in the Web 2 Scene: The Web supports up to 8 scenes by default, capable of independent scene configuration and fast switching.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Adding an Encoding Device via IP Address Step 1 Click IP to add encoding devices. Figure 4-46 Encoding Device List Step 2 Input Device Name, IP Address, Port, User Name, Password and Channel Number and select the Transmission Protocol, Area Name, and Device Manufacturer. Check the checkbox of Get Stream by Stream Media to lower the network load of the device.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 3 (Optional) You can also click to add a new area and click to save the area. Step 4 Click Next to select the channel. The channel(s) displayed here depend(s) on the Channel Number you input on the previous page. Figure 4-48 Select the Channel Step 5 Click OK to save the settings and add the device. Adding an Encoding Device via URL Step 1 Click URL to add encoding devices.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 2 Input the Device Name and URL. Select the Area Name from the dropdown list or click add a new area. Figure 4-50 Add Device via URL Step 3 Click OK to save the settings. 4.4.2 Modifying the Area and Added Encoding Device Step 1 Select one area or one encoding device, and click Modify to modify corresponding parameters.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-52 Modify Encoding Device Step 2 Click OK to save the new settings. 4.4.3 Deleting the Area or Added Encoding Device Step 1 Select one area or one encoding device and click Delete to pop up the note interface below. Figure 4-53 Deleting Note Step 2 Click OK to delete it. 4.4.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Dragging the Channel to the Video Wall Step 1 Drag the channel from the left side list to realize the decoding in the selected window. You can also drag an area file to the video wall to decode the added encoding devices in the area file on the video wall. You cannot drag an area file to the video wall across the LCD and LED outputs.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-56 Decoding Channel Interface Stop Decoding Click the button to stop decoding. Decoding Status 1. Click the button to enter the decoding status interface. 2. View the decoding status. Figure 4-57 Decoding Status 3. Click More to check the decoding information of each channel. Figure 4-58 Check More Decoding Status Information Turn on Audio 1. Click the button to enter the interface below.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-59 Turn on Audio 2. Select from the dropdown list to enable the audio in the corresponding window. 3. Click OK to save the settings. Decoding Delay 1. Click the button to enter the decoding delay interface. 2. Select the type of decoding delay. The default mode is the same with medium real time and fluency. Figure 4-60 Decoding Delay 3. Click OK to save the settings. Enable Smart Information 1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 2 Click Open Window via Coordinate to enter the interface below. Figure 4-62 Open Window via Coordinate Step 3 Input the Left Margin, Right Margin, Width and Height in the corresponding text fields. Step 4 Click OK to save the settings and the opened window will be displayed on the video wall. 4.4.5 Switching Encoding Channel Purpose You can switch the encoding channel to display on the selected decoding window.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 4-65 Start Auto-Switch Step 3 Click OK to save the settings. 4.4.7 Window Roaming Step 1 Drag one camera from the left side list to the video wall layout to enable decoding in the corresponding window automatically. Step 2 Drag the decoding window randomly to realize the window roaming on the video wall.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 1 In the Video Wall interface drag the channel from the left side list to realize the decoding in the selected window. Figure 4-67 Save the Scene Step 2 Click Save to save the scene directly or click Save as to pop up the following dialog box. Figure 4-68 Save as Interface Step 3 Input the Name and click OK to save the scene. Figure 4-69 Scene List Step 4 Select one of the scenes you have configured.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Chapter 5 Decoder Configuration and Operation by Client Software Run the disk of iVMS-4200 Video Wall Client Software, and double click the icon to install it in your PC. In this chapter, the basic procedure of operating the decoder by the software is described and the description is based on the video wall client software version shown in the following figure.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Table 5-1 Decoding Toolbar Icon Name Description / Start/Stop Live View Start/Stop live view of all the windows. / Start/Stop All Decoding Start/Stop decoding all signal sources and cameras. Close All Windows Close all the windows displayed on the video wall. Start All VCA Decoding Start VCA decoding for all live view signals. Once started, the VCA information can be viewed in live view.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-3 Device Management Interface Step 2 Click Add Device and you can add device manually by means of IP address/domain, IP segment and HiDDNS. Figure 5-4 Add Device by IP/Domain Step 3 You can add device by detecting the online devices. The active online decoding devices in the same local subnet with the software are displayed on the list. Select the decoder and click Add to Client to add the decoder.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-6 List of Added Devices 5.2 Configuring Video Wall Settings 5.2.1 Configuring Video Wall Layout Adding a Video Wall Step 1 Click Video Wall tab to enter the Video Wall interface. Figure 5-7 Video Wall Interface Step 2 You can use the default video wall layout or click Add Video Wall interface. and select Add Video Wall to enter the You can modify the default video wall, but not allowed to delete it.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-8 Add Video Wall Step 3 Input the Video Wall Name, and the number of windows in row and column text fields. Step 4 Click Add to add the video wall. Up to 5 video walls can be added to the client software. The range of the row number is between 1 and 16, and column number between 1 and 20. Step 5 Drag the output channels from the left side list to link the decoding output to the video wall.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Modifying a Video Wall Click Modify Video Wall to edit current video wall’s layout, name and decoding outputs. Figure 5-10 Modify Video Wall Deleting a Video Wall Select Delete Video Wall and the information dialog box pops up. Click OK to delete the selected video wall. Figure 5-11 Delete Video Wall 5.2.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-12 Edit BNC Output Step 2 Select the Output Type and set the corresponding parameters. Only LCD output type can be configured. Step 3 Select the Video Standard. PAL and NTSC are selectable. Step 4 Check the checkbox of Batch Configuration to set the same configuration for other outputs with same signal source. Figure 5-13 Batch Configuration Step 5 Click OK to save the settings.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-14 Edit HDMI Output Step 2 Select the Output Type and set the corresponding parameters. You can select LCD and LED. LCD 1. Select the Output Type to LCD. 2. Select the Output Resolution from the dropdown list. LED 1. Select the Output Type to LED. 2. Select the Output Resolution from the dropdown list. 3. Input the Width × Height in the corresponding text fields.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-16 Batch Configuration Step 4 Click OK to save the settings. You can also modify the LED resolution by selecting the LED area and click LED Resolution Config to input the LED Resolution in the text fields. Figure 5-17 Configure LED Resolution 5.2.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 3 Select Blank Screen or Last Frame when decoding ends. If you select Blank Screen, the screen will change blank when the decoding ends. If you select Last Frame, the screen will show the last frame when the decoding ends. Step 4 Select No Signal or Last Frame when streaming fails. If you select No Signal, there shows no signal when streaming fails. If you select Last Frame, the screen will show the last frame when streaming fails.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-20 Configure Virtual Screen Step 4 Select the window(s) you want to add virtual screen. You cannot add virtual screen across the LCD and LED areas. Step 5 Click Add Virtual Screen to enter Configure Virtual Screen interface. 1. Select a virtual screen mode from column number. and input the row and For the mode, the row number ranges from 1 to 16 and column number ranges from 1 to 20.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 3. Click OK to save the settings and the dotted line in grey constitutes the virtual screen division. Figure 5-22 Added Virtual Screen Step 6 (Optional) Select the configured virtual screen area and click Delete Virtual Screen to delete it. Step 7 On the Video Wall interface, drag a signal source to the window, and you can view the live view in the virtual video wall layout. Figure 5-23 Live View in Virtual Screen 5.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual After enabling decoding and displaying, the video from the encoding devices can be displayed on the video wall. And the real-time live view is shown on the physical video wall. 5.3.1 Decoding and Displaying Video Step 1 Enter the Video Wall interface. Figure 5-24 Video Wall Interface Step 2 Click Scene to expand the scene interface.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual You can click on the lower part of the interface to stop decoding of all the windows. Step 4 If the decoded camera supports PTZ control, you can click PTZ Control to expand the PTZ control panel. Figure 5-26 PTZ Control Panel Step 5 Right-click on a playing window to activate the decoding management menu as shown below. The menu differs depending on the devices.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Decoding Status: View the status of the decoding channel, like decoding status and stream type. Stick at Bottom: Generally the selected window is at top by default. Click Stick at Bottom to place the selected window at bottom. Lock/Unlock: Click Lock to lock the window. The locked decoding window is unable to do any operation. Set Alarm Window: Display the video triggered by event or alarm input on video wall.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-29 Open the Window via Coordinate (2) Step 2 Select the Device Name from the drop down list, and input the X-Coordinate, Y-Coordinate, Width and Height. Step 3 Click OK to save the settings and the opened window will be displayed on the video wall. You cannot open the window via coordinate across both the non-LED and LED screens. You cannot edit the LED X-Coordinate and LED Y-Coordinate.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-30 Video Wall Step 2 Click Window at the bottom to unfold more configuration and operation toolbar. Step 3 Click Start Playback to start searching the video files of the camera. Figure 5-31 Playback Interface Step 4 If the record file is of current day, the video file can be played back automatically.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Table 5-2 Playback Toolbar Icon Function Pause/Start the playback Delete View Slow Forward Fast Forward Start/Stop Clipping Capture 5.3.4 Configuring Auto-Switch Decoding Purpose Auto-switch decoding refers to you can configure multiple video streams in a video output and the dwell time in switching video streams. Step 1 Drag a camera group to the display window of the video wall.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 2 Click Window Configuration to pop up the configuration dialog box. Figure 5-34 Window Configuration Step 3 Configure the parameters as needed. The window status shows the current status of the selected window. Alarm Window: Display the video triggered by the event or alarm input on the selected window of the video wall. Decoding Delay: Set the delay status of the decoding according to the actual needs.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 1. Log in to the camera via the Web browser. 2. Click Configuration > Advanced Configuration > System > VCA Resource Type to enter the VCA Resource Type configuration interface. 3. Select Temperature Measurement and Behavior Analysis as the VCA Resource Type. 4. Click Save to save the settings. Step 2 Configure temperature measurement. 1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-36 Temperature Measurement and Alarm 2. Set the alarm rule: Select a temperature measurement rule from the rule list and configure the parameters. Name: You can customize the rule name. Type: Select point, line, or frame as rule type. Emissivity: Set the emissivity of your target. The emissivity of each object is different. Distance (m): The straight-line distance between the target and the device.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Tolerance Temperature: Set the tolerance temperature and the device judges whether the triggered alarm stops until the device temperature/temperature difference is lower than rule temperature by tolerance temperature. For example, set tolerance temperature as 3°C, set alarm temperature as 55°C, and set pre-alarm temperature as 50°C.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 5. Set Temperature Difference Alarm. Click Temperature Difference Alarm to enter the temperature difference alarm interface, up to four temperature difference alarms can be set. Temperature Difference Alarm is only applicable to the targets set by frame. 6. Set Alarm Linkage. Click Alarm Linkage to enter the alarm linkage interface and set the linkage methods. 7. Click Save to save the settings.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-41 Live View Configuring Dynamic Fire Source Detection Step 1 Configure the VCA resource type. 1. Log in to the camera via the Web browser. 2. Click Configuration > Advanced Configuration > System > VCA Resource Type to enter the VCA Resource Type configuration interface. 3. Select Dynamic Fire Source Detection as the VCA Resource Type. 4.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 2. Check the checkbox of Enable Dynamic Fire Source Detection to enable the function. 3. (Optional) Check the checkbox of Display Fire Source Frame on Stream to display a red frame around the fire source on stream when fire occurs. 4. You can slide the cursor to adjust the Sensitivity degree of dynamic fire source detection from 1 to 10. The bigger the number is, the more sensitive the detecting would be. 5.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 3 Check the checkbox of Enable Ship Detection to enable the function. Step 4 Check the checkbox of Display Detection Frame on Video to display the frame and alarm line on stream. Step 5 Input the device height in the textbox as the height of device above the water level. Step 6 Draw the ship detection area and the alarm lines. 1. Click Draw Area button.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 2. On the Live View Parameters section, select the Enable radio button after Rules to display the colored marks when the motion detection, face detection, or intrusion detection is triggered. E.g., enabled as the rules are, and the face detection is enabled as well, when a face is detected, it will be marked with a green rectangle on the live view. Step 2 Configure the VCA information. 1.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-46 Decode Thermal Camera on the Video Wall If VCA is enabled for the thermal network camera, the decoder can analyze the VCA behavior, mark the moving target and track it. You can view the VCA information marked in the green frames in the live view. If the rule configured for the thermal network camera is broken, the alarm will be triggered.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 5.5.1 Configuring the RSC Server Step 1 Install the RSE Server, which enables the PC screen to be displayed on the video wall, and double-click to run it. Figure 5-47 Run the RSC Server Step 2 You can click Status to check the server information, including the IP address, name, port, password of the server, and the connected device number.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 5.5.2 Remote Screen Control via RSC Server Step 1 Enter the Video Wall interface and click in the Camera list area, or click Device Management interface to add the RSC server. on Figure 5-49 Add RSC Server Enter the parameters to add the RSC server. Please refer to Chapter 0 Step 2 Adding an Encoding/Decoding Device to add the RSC server.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-51 Link RSC to Video Wall Step 5 Right click on the window and select Screen Control to remotely control the signal source. The RSC server supports the screen control for 1-channel video output only. Figure 5-52 Right-click Menu Step 6 You can use the toolbar on the window’s upper right corner to realize the operations for image, video, PPT and remark.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-53 Screen Control Interface Click to display all the image files in the directory set in the RSC Sever. Figure 5-54 Screen Control Interface (1) Click to display all the video files in the directory set in the RSC Sever. Figure 5-55 Screen Control Interface (2) Click to display all the PPT files in the directory set in the RSC Sever.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Figure 5-56 Screen Control Interface (3) Click to pop up the following remark tool bar. You can select a color and set the line width to make remarks on the PPT. Figure 5-57 Remark Tool Bar 5.6 Remote Configuration Purpose On the Remote Configuration interface, you can configure the parameters of the added device, including the system, network, event, etc..
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 2 Configure the System parameters, Network parameters and Event parameters on the Remote Configuration interface. 5.6.1 Configuring Port Aggregation Purpose The Port Aggregation (Ethernet Channel) is port link aggregation technology or port-channel architecture used for the connection between the switches. Step 1 Click Remote Configuration > Network > Port Aggregation to enter the Port Aggregation Settings interface.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual The port aggregation is not supported by DS-6901UDI. The switch connected to DS-6900UDI must be configured with the port aggregation as well. Two adjacent network interfaces cannot be selected to form a link. For example, you can select Network Interface 1 and Network Interface 3, or Network Interface 2 and Network Interface 4.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 2 Check the checkbox of Enable to enable Wi-Fi. Step 3 Input an effective SSID. Step 4 Click WLAN Settings tab to enter the WLAN Settings interface. Figure 5-61 WLAN Settings Step 5 Select the NIC Type to Auto-Switch and check the checkbox of Enable DHCP. Click Save to save the settings and the device will reboot to enter the Wi-Fi mode. If you want to enable Wi-Fi, you must select NIC Type to Auto-Switch.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Step 7 Select one Key for activation. 4 keys can be selected. Input the key and you can check the checkbox of Display Password to show the clear-text password. 8 to 63 ASCII characters or 8 to 64 hexadecimal characters are allowed. Step 8 Click Save on the Wi-Fi Settings interface to save the settings. If wired network cable is connected to the device when the Wi-Fi is enabled, wired network will be connected by priority.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Chapter 6 Display via Wi-Fi Connection Purpose With the Wi-Fi module connected, the DS-6900UDI supports displaying the signal from mobile phone or pad via AirPlay (IOS) or DLNA (Android) to the video wall or other display units. Step 1 Insert the Wi-Fi module to the DVI video input connector on the rear panel of the device.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Chapter 7 Appendix 7.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual External interface General Decoding capability 12MP@20fps: 2ch 8MP@30fps: 4-ch 5MP@30fps: 6-ch 3MP@30fps: 10ch 1080p@30fps: 16ch 12MP@20fps:8-ch 12MP@20fps:4-ch 8MP@30fps: 16ch 8MP@30fps: 8-ch 5MP@30fps: 245MP@30fps: 12-ch ch 3MP@30fps: 20-ch 3MP@30fps: 401080p@30fps: 32- ch ch 1080p@30fps: 64ch Split screen 1/4/6/8/9/12/16 1/4/6/8/9/12/16/2 5 1/4/6/8/9/12/16/ 25/36 2; 10/100/1000 Mbps self-adaptive 1; 10/100/1000 management net
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Table 7-2 DS-6910/6912/6916 UDI Specification Model DS-6910UDI DS-6912UDI DS-6916UDI WSXGA: 1680×1050@60Hz WXGA: 1440×900@60Hz WXGA: 1280×800@60Hz, 1366×768@60Hz, Video/ Audio output VGA and input DVI-I 1080p: 1920 × 1080@50/60Hz UXGA: 1600 × 1200@60Hz XVGA: 1280 × 960@60Hz 720p: 1280 × 720@50Hz/60Hz SXGA: 1280 × 1024@60Hz XGA: 1024 × 768@60Hz 10-ch 12-ch 16-ch 4K: 3840 × 2160@30Hz ( for even interface only) 1080p: 1920 × 1080@
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual Network interface 2; 10/100/1000 Mbps self-adaptive management network interface 2; 10/100/1000 Mbps self-adaptive Ethernet interface 16; 10M/100 Mbps self-adaptive Ethernet interface External interface General Serial interface 1 RS-232 (RJ 45), 1 RS-485 Two-way audio in 1-ch, 3.5 mm connector (2.0 Vp-p, 1 k Ω) Two-way out 1-ch, 3.5 mm connector (2.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 7.2 FAQ Why cannot ping the decoder? − Check the cable and the switch. − Please refer to Chapter 3 to configure the IP address of the decoder. Why cannot connect the decoder with client software? − Check the decoder IP address. − Cable is connected. − User name and password of decoder are correct. Why cannot play back the record files in DVR with decoder? − Check the DVR network connection.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 7.3 List of Third-Party IP Cameras Access IP Camera Manufacturer Panasonic Sony Axis Supported Video Format Model SP306H SP336H SNC-CH220 SNC-RH124 P5532 Q7404 Sanyo VCC-HD2500P SAMSUNG SND-5080P Bosch NBC265P Zavio D5110 Arecont AC1305M Pelco IX30DN-ACFZHB3 Onvif Supported H.265+. H.265, H.264, H.
HD Video and Audio Decoder User Manual DS-6900UDI Decoder User Manual 91