User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
35
Batch Configuration Figure 4-43
Click OK to save the settings. Step 5
Right click one of the HDMI signal sources and click Output Mode Configuration to pop up Step 6
the interface below.
Output Mode Configuration Figure 4-44
Select the output mode to HDMI or DVI. Step 7
Check the checkbox of Batch Configuration to set the same configuration for other HDMI Step 8
outputs.
Click OK to save the settings. Step 9
Decoding Operation 4.4
Purpose
After the video wall layout configuration, the decoding video on the video wall can be realized in
this section.
Click Video Wall to enter the video wall interface. Step 1