User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
48
Decoding Toolbar Table 5-1
Icon
Name
Description
/
Start/Stop Live View
Start/Stop live view of all the windows.
/
Start/Stop All Decoding
Start/Stop decoding all signal sources and
cameras.
Close All Windows
Close all the windows displayed on the
video wall.
Start All VCA Decoding
Start VCA decoding for all live view
signals. Once started, the VCA
information can be viewed in live view.
Stop All VCA Decoding
Stop VCA decoding for all live view
signals.
Open Window
Draw a window according to your need.
The size and position of the window are
adjustable.
Open Window via
Coordinate
Open a window by inputting X-
coordinate, Y-coordinate, width and
height.
Refresh
Refresh the video wall status.
The software is capable of many functions for controlling and managing many devices. In this
manual, only the operation related to the decoder is introduced.
Adding an Encoding/Decoding Device 5.1
Click Device Management tab to enter the Device Management interface. Step 1