User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
62
Open the Window via Coordinate (2) Figure 5-29
Select the Device Name from the drop down list, and input the X-Coordinate, Y-Coordinate, Step 2
Width and Height.
Click OK to save the settings and the opened window will be displayed on the video wall. Step 3
You cannot open the window via coordinate across both the non-LED and LED screens.
You cannot edit the LED X-Coordinate and LED Y-Coordinate.
The X- coordinate and Y-coordinate are relative output channel coordinates.
Configuring Playback 5.3.3
Purpose
The video file is supported to be played back on the video wall.
Playback function is only supported by decoder.
Drag the camera on the left-side list to the display window of video wall, or you can open a Step 1
window if supported.