Operation Manual

Gebruikers Handleiding DS-7000HI-S Series Net DVR
Page 18
Select channel
In PTZ control mode, you can press numeric keys to select channel. If DVR has less than
10 channels, press one numeric key to select. For example, press[2]key to selct 2
nd
camera
PTZ. If DVR has 10 or more than 10 channels, you must press two numeric keys to
select. For example, press[0][2]to select 2
nd
camera PTZ, and press[1][2]to select 12
th
camera PTZ.
After you select the camera PTZ, you can use the short keys to control PTZ.
PTZ control keys description
Direction control keys: [↑],[↓],[←],[→];
ZOOM control keys: [ZOOM+],[ZOOM-];
FOCUS control keys: [FOCUS+],[FOCUS-];
IRIS control keys: [IRIS+],[IRIS-];
Adjust preset keys: [REC/SHOT];
Auto control key: [PLAY/AUTO];
Wiper control key: [WIPER/MENU];
Light control key: [LIGHT/F1];
Auxiliary device control key:[AUX/F2]
Adjust preset description
In PTZ control mode, press[REC/SHOT]key, and press the preset number (three numeric
keys), DVR will adjust the corresponding preset number. Repeat pressing[REC/SHOT]key,
and press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
Note: The PTZ preset number is set already. Please refer to PTZ menu for preset setup. V1.4
firmware can support 128 preset numbers at most.
Start/Stop auto in PTZ control mode
In PTZ control mode, press[PLAY/AUTO]
key to start PTZ auto function.
Press[PLAY/AUTO]key again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue auto
function.You must enter PTZ control mode again, and press[PLAY/AUTO]key to stop.
Exit PTZ contrl mode
Press[ESC]or[ENTER]to exit and return preview mode.
4.5 Handmatige Opname
Opmerking: De gebruiker dient de corresponderende rechten te bezitten, en de DVR een
HDD en de HDD dient al te zijn geformatteerd.
Handmatige opname
In de preview mode, druk op de [REC] toets, login dialog verschijnt, selecteer de naam en
voer het correcte paswoord in, u kunt nu de “Handmatige Opname” interface binnengaan.
In de menu mode, druk op de [REC] toets om de “/Handmatige Opname” direct binnen te
gaan.